 |
 |
| |
|
IMPROVEMENT
PLANS SUBMITTAL REQUIREMENTS
(Format requirements per Standard
Procedures, Specifications, and Drawings Section I-B6-1) |
| |
|
|
| |
District
Facilities
Work necessary for the installation of mains, services, and
appurtenances to provide potable water, recycled water, and/or
sewer service shall be shown on the Improvement Plans. The Improvement
Plans shall be prepared under the direction of, and signed by,
a currently registered professional engineer in the State of
California.
Improvement Plans showing the proposed Work shall be submitted
to the District for approval. Included with this submittal shall
be all calculations requested by the District Engineer to verify
the design of any portion of the recycled water, potable water,
or sewer systems. Calculations shall be based on methods generally
accepted by the engineering profession and shall be neatly and
legibly done in such form as to enable them to be readily checked.
Calculations shall be signed and stamped by a State of California
registered civil engineer. In addition, literature and technical
data concerning any of the materials and equipment to be used
shall be furnished to the District Engineer upon request.
Improvement Plans shall comply with the following requirements.
Exceptions for small projects may be granted subject to the
discretion of the District Engineer. |
|
| |
|
|
|
|
1.
|
During
plan checking, submit three (3) sets of full size Improvement
Plans, with a minimum drawing size of 22 inches by 34
inches: |
|
|
|
|
|
|
2.
|
All
mains shall be shown in plan and profile with services
and laterals in plan. |
|
|
|
|
|
|
3.
|
All
existing and proposed fire hydrants, valves, and other
miscellaneous appurtenances shall be shown for water systems.
Commercial fire hydrants shall be specifically distinguished. |
|
|
|
|
|
|
4.
|
All
existing and proposed backflow preventers, valves and
other miscellaneous appurtenances shall be shown for recycled
water systems. |
|
|
|
|
|
|
5.
|
All
existing and proposed manholes, cleanouts, and other miscellaneous
appurtenances shall be shown for sewer systems. |
|
|
|
|
|
|
6.
|
All
existing and proposed potable and recycled water mains,
storm and sanitary sewers in the vicinity of any proposed
potable water and/or recycled water facilities shall be
shown. |
|
|
|
|
|
|
7.
|
All
required easements shall be shown. |
|
|
|
|
|
|
8.
|
Plan
and profile drawing scale shall be at least 1 inch equals
40 feet. |
|
|
|
|
|
|
9.
|
An
overall plan view of the entire proposed potable water,
recycled water, and sewer line system shall be provided
and shown on one sheet with a drawing key for subsequent
plan and profile sheets. In addition, entire single utility
should be shown on single sheets. |
|
|
|
|
|
|
|
|
10.
|
Improvement
Plans shall include a location map showing the area to
be served relative to established public roads. |
|
|
|
|
|
|
11.
|
Improvement
Plans shall include a note that states: "Work shall
comply with the Standard Procedures, Specifications, and
Drawings of Dublin San Ramon Services District." |
|
|
|
|
|
|
12.
|
When
service utilities and layouts are not presented clearly
on Improvement Plans, District may require enlarged details
to be provided. |
|
|
|
|
|
|
13.
|
Utility
poles, street lights and trees shall be specifically identified
on Improvement Plans.
The District cost of reviewing the first two (2) Improvement
Plan submittals is considered covered by the standard
plan checking fees. Additional Improvement Plan submittal
reviews will be charged to the Applicant on the basis
of District hourly review time.
Once a development project has been approved by the District
Engineer, then three (3) full size bluelines, one (1)
reduced 11-inch X 17-inch copy, and one (1) digital vectorized
file on floppy or CD of Improvement Plans shall be submitted
to the District. Digital raster copies are not acceptable.
The digital vectorized files shall be in AutoCAD 14 or
higher drawing format. Drawing units shall be decimal
with a precision of 0.00. Angles shall be in decimal degrees
with a precision of 0.00. All objects and entities in
layers shall be colored by layer. All layers shall be
named in English. Abbreviations are acceptable. All submitted
map drawings shall use the Global Coordinate System of
USA, California, NAD 83 California State Planes, Zone
III, and U. S. foot.
No changes shall be made to the approved Improvement Plans
unless approved and initialed by the District Engineer.
In the case of an approved change, all submitted sheets
affected by the change shall be replaced.
During construction, one (1) completed set of Improvement
Plans shall be kept on site at all times. At the completion
of all Work, Applicant shall submit Record Drawings in
digital vectorized form on a computer disk and two (2)
sets of hard copies of the drawings (one (1) set of 22-inch
x 34-inch and one (1) set of 11-inch x 17-inch). The digital
vectorized files shall conform to the format mentioned
above. |
|
|
|
|
|
|
Customer Owned Facilities
Work necessary for the installation of the irrigation
system to use recycled water in customer owned facilities
shall be shown on the Landscaping Plans. These plans
shall be prepared in accordance with Section IV of the
District Standards for use of recycled water and the
Recycled Water Use Guidelines. Customer Connection Drawings
shall also be prepared and submitted to the District
for review showing the recycled water use areas, main
lines and valves (See example provided in the Recycled
Water Use Guidelines). In addition, plans for customer
owned potable water facilities shall also be provided
to the District.
The landscape plans and Customer Connection Drawings
shall be submitted to the District for review and comment
prior to approval by the City or County.
|
|
|
| |
|
|
